You can pick up door push plates to fix door holes for around $13 on Amazon.ĭoor Wraps (also called wrap-around plates or door reinforcers) are designed to help strengthen a door and prevent the door from being kicked in, but they can also be used to cover holes in places where holes aren’t convenient. It’s not as pretty as it may have been with a new door, but a couple of plates installed to cover existing door holes is drastically cheaper than replacing a solid wood door. In the photo showing a brass push plate under a handle set, the customer had us replace her old handle set using this method. They can be ornate, but for repairing door holes you’ll want a basic flat door plate so that the door hardware can easily install over it. They are usually 4 x 16 inches, but can be purchased in different sizes and in many different finishes. Push plates are designed for pushing open a door. Push Plate Used to Cover Large Void in Door The cap side is smooth be sure to install this with the connector bolt on the inside of the door so it cannot be removed from the outside. They are held together by a connector bolt and cap (this is basically a screw that screws into another, hollow screw). They can cover holes up to 2-1/2 inches.ĭoor hole cover plates cover the hole on both sides of the door by installing a flat plate over each side. They work well to cover the round holes left by cylindrical locks such as deadbolts and door knobs. Hole filler plates, also called hole cover plates, are the least expensive way to cover a door hole. Or, you can use push plates or door wraps, for when there are multiple holes to cover (like when switching to/from handle sets) or large air voids to cover/patch (like those left when switching from mortise locks to cylindrical locks). To affordably and easily cover a door hole, you can use a door-hole cover plate to cover holes left by a single cylindrical lock, such as a deadbolt. You could replace the door or use a door hole filler, but replacing a door is NOT the most affordable way to fix door lock holes, and patching the door hole with door putty or other filler requires some skill, and the hole patches often crack over time. This is common when switching from, or to, door handle sets instead of a door knob / deadbolt combination. What do you do when you have a door that has a hole pattern for a previous lockset, but the new lockset holes don’t line up? That is, the old hole and the new hole patterns don’t match? Using a Door Wrap to Cover a Door Hole How to Cover a Door Hole
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |